Noticias

Nuevos productos

  • Trimetilclorosilano (TMCS) CAS: 75-77-4

    Trimetilclorosilano (TMCS) CAS: 75-77-4

    Nombre: Clorotrimetilsilano Número CAS: 75-77-4 Fórmula molecular: C3H9ClSi Peso molecular: 108,64 Número EINECS: 200-900-5 Archivo mol: 75-77-4.mol

  • Trimetiletoxisilano CAS: 1825-62-3

    Trimetiletoxisilano CAS: 1825-62-3

    Nombre: Etoxitrimetilsilano Número CAS: 1825-62-3 Fórmula molecular: C5H14OSi Peso molecular: 118,25 Número EINECS: 217-370-6 Archivo mol: 1825-62-3.mol

  • Dimetildimetoxisilano CAS1112-39-6 DMDMS

    Dimetildimetoxisilano CAS1112-39-6 DMDMS

    Especificación Nombre en inglés: Dimetildimetoxisilano Número CAS: 1112-39-6 Fórmula molecular: C4H12O2Si Peso molecular: 120,22 Número EINECS: 214 189 4 Archivo mol: 1112-39-6.mol Aplicaciones Como agente de control estructural, extensor de cadena y agente de tratamiento de relleno, se usa ampliamente en el tratamiento de gel de sílice orgánico y negro de humo blanco Propósito Como agente de control estructural, extensor de cadena y agente de tratamiento de relleno, se usa ampliamente en el Tratamiento de gel de sílice orgánico y negro de humo blanco. Este producto se utiliza como agente de control estructural y extensor de cadena para mejorar el rendimiento del procesamiento mecánico, extender el tiempo de almacenamiento de mezclas de caucho y puede reemplazar el uso del aceite de silicona de hidroxilo. Ampliamente utilizado en el tratamiento de silicona orgánica y negro de carbón blanco Propósito El dimetildimetoxisilano se usa como agente de control estructural y extensor de cadena...

  • Yodotrimetilsilano CAS:16029-98-4 (TMIS)

    Yodotrimetilsilano CAS:16029-98-4 (TMIS)

    Propiedades del trimetilyodosilano Punto de fusión<0 ° C Punto de ebullición 106 ° C (lit.) Densidad 1,406 g/mL a 25 ° C (lit.) Índice de refracción n20/D 1,471 (lit.) Punto de inflamación − 25 ° F Condiciones de almacenamiento - 20 ° C Solubilidad Reacciona Forma Líquido Gravedad específica 1,47 Colores claros a rojizos Reacciones de solubilidad en agua Sensibilidad: Sensibilidad a la humedad y la luz Sensibilidad a la hidrólisis 8: Reacciona rápidamente con humedad, agua y disolventes de protocolo BRN 1731136 Estabilidad Sensibilidad (reactiva) InchiKey CSRZQMIRAZTJOY-UHFFFFAOYSA-N Base de datos CAS 16029 -98-4 (Referencia de la base de datos CAS) Información química del NIST Yodotrimetilsilano (16029-98-4) Información química de la EPA Silano, yodotrimetilo - (16029-98-4)

  • Hexametildisilano CAS:1450-14-2 (HMD)

    Hexametildisilano CAS:1450-14-2 (HMD)

    Propiedades del hexametildisilano Punto de fusión 9-12 °C (lit.) Punto de ebullición 112-114 °C (lit.) Densidad 0,715 g/mL a 25 °C (lit.) Índice de refracción n20/D 1,422 (lit.) Punto de inflamación 29 ° F Condiciones de almacenamiento Almacenar a<=20 ° C Sol solventes orgánicos comunes; Insul H2O Forma líquida Gravedad específica 0,729 Incoloro Insoluble en agua Doble en alcohol, éter y acetona Sensibilidad a la hidrólisis 1: no hay reacción significativa con sistemas agudos BRN 1633463 Estabilidad InchiKey NEXSMEBSBIABKL-UHFFFAOYSA-N Base de datos CAS 1450-14-2 (Referencia de la base de datos CAS) NIST Información sobre sustancias químicas Disilano, hexagonal - (1450-14-2) Información de sustancias químicas de la EPA Disilano, hexagonal - (1450-14-2)

  • Hexametildisiloxano CAS:107-46-0

    Hexametildisiloxano CAS:107-46-0

    Introducción:  El hexametildisiloxano (éter de silicona, agente sellador MM) es un líquido incoloro y transparente que tiende a delicuescencia. Insoluble en agua, soluble en varios disolventes orgánicos. Se utiliza como aceite de silicona, caucho de silicona, productos farmacéuticos, líquidos estacionarios para cromatografía de gases, reactivos analíticos, agentes hidrófobos, etc. Se obtiene por hidrólisis de trimetilclorosilano.  Las propiedades físicas del hexametildisiloxano.  Líquidos incoloros y transparentes. Fácilmente delicuescente, inflamable y en contacto con altas temperaturas, llamas abiertas y agentes oxidantes fuertes, existe riesgo de combustión. Punto de ebullición 99,5 ℃. Punto de inflamación -1,1 ℃. Densidad relativa (d2525) 0,7606. El índice de refracción es 1,3750. Insoluble en agua, soluble en varios disolventes orgánicos.  El hexametildisiloxano es una importante materia prima de silicio orgánico primario, que se utiliza a menudo como agente de protección en la pr...

últimas noticias

Canton Fair 2026 Phase 3: Source SLES & Additives Online

Canton Fair 2026 Phase 3: Source SLES & Additives Online

We Skipped Canton Fair Phase 3 — But You Can Still Source SLES, Food and Feed Additives From Us Online The 140th Canton Fair is now in its third and final phase, running 31 October – 4 Nov...

Silicone DMC Price Holds Firm Ahead of Holiday: What Buyers Should Do Now
2026-09-30

Silicone DMC Price Holds Firm Ahead of Holiday: What Buyers Should Do Now

China's silicone DMC market closed the pre-holiday week in a stalemate. Mainstream monomer producers held offers at 14,400–15,000 yuan per tonne, with some spot deals concluded 200–300 yuan lower. Behind the flat price line sits a tighter picture: industry operating rates are running at roughly 62.7%, well below the historical average for this time of year, and emission-reduction policies are keeping monomer plants from running full.

For buyers of silicone intermediates and downstream products, this combination — firm prices, constrained supply, and hesitant demand — is a specific kind of market. It rewards planning and punishes spot panic buying. Here is what the numbers say and what to do about them.

The numbers: where the market actually stands

Three data points matter more than the headline price:

  • DMC price: mainstream offers 14,400–15,000 yuan/tonne as of 30 September, with actual transactions in some cases at 14,200–14,500. The weekly average tracked by Mysteel stood at 14,750 yuan/tonne on 24 September, up 4.75% from the start of the month.
  • Operating rate: the comprehensive silicone industry operating rate was 62.69%, flat week on week and below the seasonal norm. Monomer plants are running under emission-control constraints rather than demand weakness.
  • Downstream spreads: 107 silicone rubber quoted at 14,700–15,000 yuan/tonne — essentially at parity with DMC, and inverted at some producers. Silicone oil held at 16,000–16,500. Methyl vinyl silicone rubber (MVQ) sat at 15,400–15,700.

That last point deserves attention. When 107 rubber trades at or below its own feedstock, downstream converters are running at negative or zero margin. Several sealant producers issued price-increase letters this month, but with the terminal construction sector still soft, most of those increases have not been accepted by buyers.

Why supply is tight but demand is not chasing

The tightness is policy-driven, not demand-driven — and that distinction shapes how long it lasts.

On the supply side, monomer plants face emission-reduction constraints that limit run rates. Producers describe low inventories and pre-sold orders extending into mid-to-late October. Some compounders, worried about running out of material after the holiday, have been building small positions in recent sessions.

On the demand side, buying has been strictly just-in-time. Construction sealants, textiles and electronics remain weak. High costs are suppressing restocking appetite, and most buyers are waiting rather than chasing. New energy and photovoltaic sealant applications show more resilience, but they are not large enough to move the whole market.

The result is a standoff: producers with low inventory and policy-capped output want to hold prices; buyers with thin order books refuse to pay up. Neither side has reason to blink before the holiday.

What this means for buyers

Practical steps for procurement teams sourcing silicone intermediates in this market:

  1. Do not wait for a price collapse. With operating rates near 62.7% and emission constraints still in force, the downside is limited. A 200–300 yuan concession on a spot deal is realistic; a 2,000 yuan drop is not, under current policy.
  2. Secure Q4 coverage now rather than after the holiday. Producers report pre-sold orders into mid-October. If your requirement lands in November, the window to book is this month, not next.
  3. Confirm whether your grade is supply-constrained or demand-constrained. Commodity DMC and 107 rubber are tight for policy reasons. Specialty phenyl and vinyl functional silanes are tight for capacity reasons — a different risk profile with different lead times.
  4. Specify on impurity profile, not just assay. In a tight market, secondary material circulates more freely. For functional silanes, chloride content and isomer distribution matter more than the headline purity figure.
  5. Ask for the production date and batch COA. Silicone intermediates degrade on storage, and in a fast-moving market you want to know how fresh the material is before it ships.

Where we fit

We supply organosilicon intermediates across the methyl, phenyl and vinyl series, including decamethylcyclopentasiloxane (D5) and functional silanes such as methylphenyldimethoxysilane. Chlorosilane feedstocks including dichlorodimethylsilane are available in drum and bulk quantities.

Browse the full fine chemical intermediates range for silicone, silane and specialty materials. Batch COA and MSDS accompany every shipment.

Outlook: what to watch after the holiday

Two variables will decide the direction:

  • Whether emission controls persist. If they do, supply stays capped and prices hold firm. If they ease, the operating rate recovers and prices come under pressure.
  • Whether downstream accepts higher costs. Sealant converters are already at negative margins. If terminal demand does not recover, they will simply stop buying and force monomer plants to concede.

Under the current joint emission-reduction arrangement, most market participants expect limited movement in either direction — a narrow range rather than a trend. For buyers, that argues for steady coverage over speculative timing.


Planning Q4 silicone purchases? Tell us your grade, quantity and delivery window and we will quote against current availability. Request a quotation.

Source: SMM (Shanghai Metals Market), "Silicone Weekly Review", 24 September 2026; Mysteel industrial silicon monthly analysis, 29 September 2026; Organosilicon Market pre-holiday update, 30 September 2026. Read the SMM original at news.metal.com.

 
Chatea ahora por favor haga clic aquí para la investigación
Si tiene preguntas o sugerencias, por favor déjenos un mensaje, su consulta será respondida dentro de las 12 horas.